Terry Graves - K7FE/sk

K7FE/sk - Equipment Disposition - Items For Sale (F.B.O. Terry Graves' Family)

Click here ... if you have Questions, or want to Request or Bid for an item.
Click here ... to download this list in PDF. ........... HINT: Click column heading to re-sort by its information.

Last Update: Sun, 10 Jun 2018 11:18:50 -0700.
TypeMfg.ModelDescriptionConditionTestedPICsAsking($)
AccessoryRealistic32-1110"Audio, electronic Reverb, Line or Mic in/out, (6xAA) battery or (ext.) 9VDC power required. Acid-leak corrosion in internal battery area.""PROJECT; ONLY marginal operation. Might be worth a buck as a ""tinkering"" project?"Yes (W6NCT); FAILED (marginal operation)link to imageMAKE OFFER
Power SupplyVistaCB-III RLinear AC-DC power supply; intended for low-power CB radio. Built in a sloped-top metal-case with an integrated slide-bracket on top. Appears to have an internal speaker."NEEDS REPAIR: wires soldered to slide-bracket contacts. Fuse blows immediately, even under no load."Yes (W6NCT); FAILED (NO output voltage)link to imageMAKE OFFER
AntennaHigh-Q5-160RT (equiv. to Piranha - 4/160)"mobile, multi-band HF, screwdriver antenna, with whip, secondary element/extension, and mount""TBD (looks OK); when power is applied, the motor turns both directions, so it appears to work.""Yes, KK6UE; motor operates smoothly, both directions."link to imageMAKE OFFER ($400 min.)
Power Supply(unknown)(unknown)"Linear power supply, heavy duty, 1960s or early 70s vintage, w/4 Motorola 2N3055 transistors for output reguulation."NEEDS REPAIR: part of output fuse holder missing; has internal regulation problem"Yes (W6NCT); FAILED (no output), also see KK6FUT/AY6YR Triage notes."link to imageMAKE OFFER
RF AmplifierK7FEDIY-VHF"BW: 150 MHz; IN: 10W; OUT: 100W; LINE: 12.6 VDC ; schematic provided by WB6ZUF (who indicated it is a ""Nice design"")."operational; tested at 120-160MHz; output measured at 60W at 146 MHz; available AS-IS"yes, WB6ZUF; OPERATIONAL "link to imageMAKE OFFER ($20 min.)
RF AmplifierK7FEDIY-HFBW: (HF); IN: 10W; OUT: 150W; LINE: 13.8 VDC ; uses HP power devices; schematic provided by WB6ZUF."non-operational; no input connector, available (AS-IS)""yes, WB6ZUF; FAILED "link to imageMAKE OFFER
MicrophoneChannel Master(unknown)"Small general purpose microphone, with clip on back, no connector."TBD: "TBD (not yet), sell AS-IS"link to image1.00
MicrophoneRecord-A-Call(unknown)"Dynamic microphone, with 1/8"" mini-phone connector (typ. for telephone answering machine, tape-recorder, etc.)"used; a little dirty"TBD (not yet), sell AS-IS"link to image1.00
AttenuatorK7FE(no box)"Terry's Custom Circuit: (#1) non-inductive, in-line attenuator; 2 BNCs + resistors; UNK-dB, but measures 107-240 ohms between it various ports"(unknown) "TBD (not yet), sell AS-IS"link to image2.00
Parts(unknown)(unknown)"Large, fixed air-induction coil, on form; approx 2-inch diameter, 3-inch long"TBD: appears OK"NO, sell AS-IS"link to image2.00
AttenuatorK7FE(no box)"Terry's Custom Circuit: (#2) non-inductive, in-line attenuator; 2dB; 2 BNCs + resistors"(unknown)"TBD (not yet), sell AS-IS"link to image2.00
AccessoryK7FE(no box)"Terry's Custom Circuit: TBD; apppears to be tunable filter, or maybe a bias-tap (?). It uses 12VDC for something (?); BNC in/out."(unknown)"NO, sell AS-IS"link to image2.00
AttenuatorK7FE(no box)"Terry's Custom Circuit: (#3) non-inductive, in-line attenuator; 5.5 dB; 2 BNCs + resistors"(unknown)"TBD (not yet), sell AS-IS"link to image2.00
AccessoryK7FE(no box)"Terry's Custom Circuit: Directional Coupler (small); TX in, RX out, Antenna In/Out; ""old-school"" type circuit, using a light bulb (ref. ARRL Handbook?); 3 RCAs"(unknown)"NO, sell AS-IS"link to image2.00
Test Eqpt.HeathkitIT-10Transistor Tester"dirty, missing a few screws and test leads""TBD (not yet), sell AS-IS"link to image3.00
MicrophoneStandardCMP42"Hand microphone, 4-pin (thin pin), round (Standard Radio) connector"fair (looke dirty)"TBD (not yet), sell AS-IS"link to image5.00
Dummy LoadHeathkitHN-31"Cantenna, Dummy-Load, 1-KW. Some documentation is available on the web, or from W6NCT.""Appears to have problem; but may be repairable (or testing error?). Does NOT appear as 50-ohms, or any reasonable SWR (w/RF)."Yes (W6NCT); FAILED (sold AS-IS)link to image5.00
Power SupplyLabtecAD-SS-2Wall-wart type power supply; 120VAC in; 15 VDC out at 1A; has (reverse) barrel connector for output (+ on outside of barrel!)(unknown)"TBD (not yet), sell AS-IS"link to image5.00
Test Eqpt.JPCLP400"Logic Probe, TTL or CMOS, memory (latched?) or pulse setting"TBD; appearance seems OK"TBD (not yet), sell AS-IS"link to image5.00
Test Eqpt.K7NFE-WA6ZAX(unknown)"""AntennaScope"", grid-dip meter; has several plugins with differing impedance values; BNC in/out, with F connector for impedances."(unknown)"TBD (not yet), sell AS-IS"link to image5.00
SpeakerGEMASTR"Rugged speaker, with mount"OK: some wear. But rugged; speaker worksYes (W6NCT)link to image5.00
Power SupplyTriadF41X"Filiment Transformer (only); IN(120 VAC); OUT(25.2 VAC, centertapped, 2 Amps each)""USED, looks fair; TEST measured 30.7 VAC out, centertapped at approximately 15.1 VAC (each side, unloaded)"Yes (W6NCT)link to image5.00
Parts(unknown)(unknown)"rotary micro-switch, two circuits, 6-positions each""GOOD, tested statically for DC continuity ONLY"Yes (W6NCT)link to image5.00
Power SupplyGPPSA06-15S12S-V"Small power supply; 120VAC in, 12VDC out at 1.25A"FAIR; a little dirty"TBD (not yet), sell AS-IS"link to image5.00
Parts(unknown)(unknown)"10-turn poteometer with 15-turn precision knob; 500-ohms, linear taper""GOOD, tested statically for DC resistance"Yes (W6NCT)link to image5.00
MicrophoneKachina(unknown)"hand-mic, 4-pin round connector"USED; fair condition (dirty)"TBD (not yet), sell AS-IS"link to image5.00
Antenna TunerBreakerElect.13-150"CB (11M, 27 MHz) Antenna matcher, adjustable; likely has low power rating, but possibly useful for QRP operation"FAIR"TBD (not yet), sell AS-IS"link to image5.00
AntennaComTelco(unknown)"Yagi, labeled as 806MHz, 7-elements; TNC connector"Good"NO, sell AS-IS"link to image5.00
AntennaDIYJ-pole"Heavy-duty, copper-pipe J-pole antenna; band-unknown"Appears to be in good condition; clean and well constructed"Yes (W6NCT), appears usable on 2M/440"link to image5.00
AccessoryK7FE(silver box)"Terry's Custom Circuit: Directional Coupler (large); TX in, RX out, Antenna In/Out; ""old-school"" type circuit, using a light bulb (ref. ARRL Handbook?); 3 BNCs"(unknown)"NO, sell AS-IS"link to image5.00
AccessoryK7FE(silver box)"Terry's Custom Circuit: 3dB Power Splitter; schematic included inside box, with test measurements"(unknown)"NO, sell AS-IS"link to image5.00
AccessoryK7FE(no box)"Terry's Custom Circuit: 3-port device, possibly multiplexer/splitter, using inductive matching or isolation(?); might be for using two phased antennas (?); likely for QRP power levels; 3 BNCs and mini-torroids"(unknown)"NO, sell AS-IS"link to image5.00
AccessoryK7FE(Pomona box)"Terry's Custom Circuit: appears to be a device to go inline on an RF connection (POSSIBLY a passive RF Tap, or maybe lightning protection?); 2 UHF connectors, and one screw-lug (?)"(unknown)"NO, sell AS-IS"link to image5.00
AccessoryK7FE(black box)Terry's Custom Circuit: Noise Generator; voltage source = (unknown); might be tunable (?); 1 BNC + 2 banana connectors(unknown)"NO, sell AS-IS"link to image5.00
Test Eqpt.K7FE(silver box)Terry's Custom Circuit: (possibly) high-current ammeter (?)(unknown)"NO, sell AS-IS"link to image10.00
RadioK7FE(silver box)Terry's Custom Circuit: (possibly) QRP Xtal transmitter or receiver; antenna is approximately 1 ft long; uses capacitive coupling(unknown)"NO, sell AS-IS"link to image10.00
Power SupplyESP Syst.Indy 2000"Power Pak, ""Mobile-base converter"", AC-DC supply; 13.8V, (unknown current limit), ""Variable Power Boost""""Works fine, tested no-load at (13.6-15.2) VDC output"Yes (W6NCT)link to image10.00
AccessoryK7FE(silver box)Terry's Custom Circuit: RF-operated Relay; schematic included inside box; 4 BNCs(unknown)"NO, sell AS-IS"link to image10.00
Dummy LoadGold Line(unknown)"Non-inductive Dummy load, 52 ohm, 100W, UHF connector"FAIR: a little dirty"TBD (not yet), sell AS-IS"link to image10.00
Coax SwitchHP33234A-541"Microwave Switch; SPST; SMA in, SMA out (x2); appears to be line-powered (?)""TBD; appearance seems OK, but a little dirty""NO, sell AS-IS"link to image10.00
MicrophoneDrake7073+"Small general purpose microphone, with DTMF keypad and clip on back. 4-pin connector appears to be wired for Drake transceiver (e.g., TR-7 and compatibles)."TBD: not yet tested"TBD (not yet), sell AS-IS"(PENDING)10.00
LP filterDrakeTV-2000-LP"Low-pass Filter, 1KW below 30 MC; UHF in/out""GOOD; externally blemish, but tested OK using VNA (graphs available)"Yes (W6NCT and AG6AG)link to image10.00
AntennaK7FE(custom)"17M, half-wave, wire-dipole with current balun; appears to be QRP; uses RCA connector"Appears to be in good condition; clean and well constructed"currently UNTESTED, sell AS-IS"link to image15.00
Test AccyHP476A"Bolometer mount; temperature coefficient = positive; 1MHz-1GHz range; N-connector input (50-ohm, 10mW); 200-ohm, standing-wave, BNC-connector output;""NO, sell AS-IS"link to image20.00
Test AccyHP33803A"Mixer-detector, in-line device, 50-ohm RF-in to IF or video out, requires DC-bias; part of a pair (33801 for positive-bias, 33802 for negative-bias); 2-12.4 GHz; 100 mW; SMA in/out"TBD: appears OK"NO, sell AS-IS"link to image20.00
Test AccyHPHMXR-5001"Microwave mixer; 2-12.4 GHz; IF (SMA) in, LO (SMA) in, RF (SMA) oout"TBD; appearance seems NEW"NO, sell AS-IS"link to image20.00
AttenuatorWeinschel10-10"In-line attenuator 50-ohm, w/two 50-ohm Type-N connectors; -10 dB to 1 GHz"Appears to attenuate a low-power signal as indicated.Yes (W6NCT)link to image20.00
AccessoryAutekQF1Active (audio) filterGOOD; tested OKYes (W6NCT)link to image20.00
Test AccyHP33001DAbsorptive Modulator; SMA connectors (3)TBD; appearance seems OK"NO, sell AS-IS"link to image20.00
Test Eqpt.HP201C"Audio Oscillator, 19-20KC (according to controls)"FAIR"TBD (not yet), sell AS-IS"link to image20.00
AttenuatorHP8491A"In-line Attenuator, DC-12.4GHz, 10dB, 100W max.; N connectors in/out"TBD; appearance seems OK"TBD (not yet), sell AS-IS"link to image20.00
RadioSiltronix90"External VFO (only); specs: TBD (12VDC op, dial labeled for 11M, probably works on Swan as well)"TBD (looks OK)"NO, sell AS-IS"link to image20.00
AttenuatorNarda Microline774-3Inline attenuator; 50-ohm; 3dB; DC-10GHz; 2W avg.; N connectors in/out(unknown)"TBD (not yet), sell AS-IS"link to image20.00
RF AmplifierHenry50A10"RF Amplifier, VHF/2M/146.0; 5-20W in, 50W out; UHF connectors; includes docs; MISSING power supply cable (uses 8-pin Cinch connector); MAY NEED T/R relay repair (?)""appearance OK; RF transistors appear OK (ckd. w/Ohmmeter); T/R relay didn't seem to close fully (MAY NEED REPAIR?); SOLD ""AS-IS""""(WB6ZUF) preliminary testing indicated RF transistors OK; tries to function, but wasn't tested with enough input drive; RE-TEST (w/sufficient drive)"link to image25.00
MicrophoneShure450"General purpose desk-microphone, with switch for high/low impedance. 4-pin connector may (?) be wired for Drake transceivers (e.g., TR-7 and compatibles)."TBD: not yet tested"TBD (not yet), sell AS-IS"(PENDING)25.00
Test Eqpt.RedcoFM-30"Frequency Counter, 5-digit; advertised 1-40 MHz, with meter sensativity to less than 1W, and able to handle up to 1KW (PEP); 10.5-16 VDC powered. Some documentation is available from Web and/or W6NCT."GOOD; Tested OK at 24.88 MHz using both AM and FM modulation.Yes (W6NCT)link to image25.00
Power SupplyPowerStatType 21"Variac, 120VAC, fused at 6A input; contains Type-21 Powerstat, rated at 3.75 Amps over 0-140 VAC, 50/60 Hz""GOOD (ext. FAIR, int. GOOD); Works OK, tested no-load at (0-148) VAC output"Yes (W6NCT)link to image40.00
Antenna TunerKenwoodAT-130Manual Antenna Tuner for HF bands (160-10M); 150W max.; UHF in/out; built-in SWR meter; appears to support internal illumination (?)"NEEDs REPAIR: ""R Tune"" knob broken off; a little dirty, but may be functional (?)""TBD (not yet), sell AS-IS"link to image40.00
Test Eqpt.HP431C"Power Meter; includes interfacing cable, and (3) thermister modules (10MHz-10GHz)"TBD (looks OK)"TBD (not yet), sell AS-IS"link to image75.00
Rotor ControllerHyGain(Ham4/CD45-II)"Rotor Controller, 8-wire, Series 82266""GOOD: Looks and works OK, tested w/T2X"Yes (W6NCT)link to image75.00
Antennaunknown"unk (2M, 11-elt)""2M, Yagi-style antenna, 11-elements, (1 of 2 identical antennas; sold separately); approximately 12-feet long; reflector attached, but isn't shown well in photo.""Appears to be in good condition; relatively clean and well constructed; but some of the elements are a little bent from storage. Currently UNTESTED, but will try to test before sale.""currently UNTESTED, sell AS-IS"link to image80.00
Antennaunknown"unk (2M, 13-elt)""2M, Yagi-style antenna, 13-elements, (1 of 2 identical antennas; sold separately); approximately 15-feet long; reflector attached, but isn't shown well in photo.""Appears to be in good condition; relatively clean and well constructed; but some of the elements are a little bent from storage. Currently UNTESTED, but will try to test before sale.""currently UNTESTED, sell AS-IS"link to image80.00
Antennaunknown"unk (2M, 13-elt)""2M, Yagi-style antenna, 13-elements, (1 of 2 identical antennas; sold separately); approximately 15-feet long; reflector attached, but isn't shown well in photo.""Appears to be in good condition; relatively clean and well constructed; but some of the elements are a little bent from storage. Currently UNTESTED, but will try to test before sale.""currently UNTESTED, sell AS-IS"link to image80.00
Antennaunknown"unk (2M, 11-elt)""2M, Yagi-style antenna, 11-elements, (1 of 2 identical antennas; sold separately); approximately 12-feet long; reflector attached, but isn't shown well in photo.""Appears to be in good condition; relatively clean and well constructed; but some of the elements are a little bent from storage. Currently UNTESTED, but will try to test before sale.""currently UNTESTED, sell AS-IS"link to image80.00
Test AccyGeneral RadioGR874"Assorted ""GR874"" (50-ohm, sexless, high frequency, low-loss); QTY-adapters: (1) N-male, (3) N-female, (3) BNC-male, (3) BNC-female; QTY-attenuators: (3) 3dB, (1) 10 dB, (3) 20 dB.""USED; fair-good condirion, with a little oxidization or tarnish""NO, visual inspection only"link to image150.00
AntennaKLM"unk (10M, 6-elt)""large beam, 10M, 6 full-length elements (NO TRAPs); all aluminum; 2-inch diameter boom, 30-ft long; includes balun"Appears to be in good condition; relatively clean and well constructed. "UNTESTED, sell AS-IS"link to image200.00
RadioHallicraftersSX-96"Vintage; General coverage HF Receiver, 538 KHz to 34 MHz. IMPORTANT: ALSO LISTED ON EBAY (https://www.ebay.com/itm/283003070149 for LOCAL pickup ONLY)"TBD (looks OK)"yes, KK6UE (pwr-on only)"link to image250.00
AntennaKLMKT36XA (6-elt)"large beam, 3-band (10-15-20M), 6 full-length elements (NO TRAPs); all aluminum; 3-inch diameter boom, 32-ft long; NO match or balun (S/B 4:1); (see http://www.m2inc.com/FGKT36XA)"Appears to be in good condition; relatively clean and well constructed. "UNTESTED, sell AS-IS"link to image500.00
TowerUS-TowerTX-455 (?)"3-section crank-up+base+mast, medium-duty, est. height=70 ft (w/15 ft mast extension); un-installed; (boat trailer NOT included); (w/o rotor or ctrlr, unless negotiated)"USED; good condition"NO, but passes visual inspection"link to image2500.00
TowerUS-Tower (?)TX-472 (?)"4-section crank-up+base+mast, medium-duty, est. height=87 ft (w/15 ft mast extension); EXCLUDES tilt-up-fixture; installed at K7FE's QTH; INCLUDES rotor+ctrlr"USED; good condition"yes, KK6UE (wenched down)"link to image5000.00
Click here ... to download this list in PDF.